Mobile Access Control System Solution
The access control management system is an efficient entrance and exit management system provided for users by computer network technology, communication technology, mechatronics technology and non-contact IC card technology. The smart card system completes the control of door locks, turnstile gate and other devices through the authentication of smart cards.
1. What is mobile access control system
The access control management system is an efficient entrance and exit management system provided for users by using computer network technology, communication technology, mechatronics technology and non-contact IC card technology. The essence of the access control system is a system that completes the control of door locks, turnstile gates and other equipment through the authentication of third-party media.
The third-party medium of the traditional access control management system is smart radio frequency cards such as IC cards and ID cards. With the advancement of science and technology and the outbreak of the global new crown epidemic in 2020, people need a non-contact access control system that does not require additional third-party media, and the mobile access control management system was born in response to the market.
The working principle of mobile access control is that the smart sensor will recognize and verify the exclusive signal sent by the mobile phone, creating a safe and smooth environment. It can be upgraded on the existing access control hardware, whether it is ordinary glass doors, retractable doors or intelligent turnstile gates, it can be easily integrated with it. We highly recommend the leading turnstile gates manufacturers on the market:
DORMAKABA
MACROSAFE
2. System application
1. Linkage with fire protection system
Access control system logical judgment linkage (soft linkage):
A single access controller can connect up to 32 sets of 16-channel alarm input V200 (512-channel alarm input) to realize point-to-point fire hardware linkage, flexibly set alarm defense zones, and perform logical settings through the access control system.
Strong cut lock power supply mode (hard linkage):
The access control system lock power supply adopts centralized power supply mode. The fire protection system can directly connect the relay to realize the control of the access control system lock power supply. When a fire alarm occurs, the relay will act in time to force the power off control of the access control system lock power supply, so that all doors automatically open. This method fully meets the requirements of personnel evacuation in the event of fire.
2. Linkage with CCTV system
The linkage between the access control system and the video surveillance system can also be realized in two ways.
The access control system can automatically send a command to the CCTV system to request a response through the interface or protocol or dry contact communication in the event of an abnormal event such as forcibly opening the door, receiving a coercive alarm password, illegal intrusion, and card reader tampering alarm. Provide the address to the CCTV system.
3. Linkage with alarm system
The access control system realizes the hardware linkage with the separate alarm host through the signal input of the dry node of the relay, so as to achieve the purpose of integrating the anti-theft alarm and the access control. The alarm signal received by the system can also be output to other systems through the relay dry node, so as to realize the hardware linkage or signal output across the system. For example, the point-to-point correspondence of the alarm signal is displayed on the indicator light in the alarm center.
4. Linkage with elevator control system
The elevator control module of the access control system can not only be connected to the elevator controller in the elevator machine room, but also can be connected to the floor control panel circuit in the car to realize the elevator control function of the entrance and exit control system.
5. Linkage with lighting system
The access control system intelligently controls the switch of the lighting system by controlling the auxiliary input and output points of the card reader interface module or the input and output points of the alarm module. When the system detects that someone reads the card and enters a certain area, it will automatically output a signal to the lighting system to turn on the lights in the room.
When the system detects that the number of people in the area is zero, it also outputs a signal to the lighting system to turn off the lights to avoid unnecessary waste of energy. This function must be realized by installing a two-way access control reader at each entrance and exit of the area.
The mobile access control system can keep your electronic identity safe for you, allowing you to access buildings, offices and other places unimpeded. It tailors a responsive environment to your status and preferences. It is committed to creating a modern access control experience, enhancing security and creating a responsive workplace that employees and visitors love
