configure default route Cisco router

Illustration Of Two Routers Connected By A Manually Configured Static Route, Contrasted With An Unused Dynamic Routing Path

Configure and Verify IPv4 and IPv6 Static Routing

Domain 3.3 | IP Connectivity — 25% of exam Learning Objectives By the end of this lesson, you will be able to: Key Terms Glossary Term Definition Static route A manually configured routing table entry pointing to a specific destination network via a next-hop address or exit interface. Next-hop IP address The IP address of...

Asad Ijaz 22 min read
Diagram Showing A Router'S Three-Way Decision Process For Directly Connected, Remote, And Default Route Destinations
CCNA

Router Path Selection: How Routers Determine the Best Path

Every time a router receives a packet, it runs through the same basic decision sequence: is the destination directly connected, is it a remote network reachable through a known route, or is there no known route at all? Understanding this sequence — and exactly how a router picks between multiple valid paths when more than...

Muhammad Khattak 8 min read
Subscribe
Subscribe