Lian Li Vector V150 INF Review: Clean Design Meets Solid Build

Performance Analysis

The Vector V150 INF earned a PPLP A+ chassis performance rating from independent PPLP Lab testing, which evaluates airflow efficiency across the full internal volume — a credible external benchmark for a case at this price point. The airflow design centres on a pull configuration: two 140mm front intake fans draw air through the infinity-mirror panel’s cut-outs behind a detachable metal mesh filter, while the rear 120mm exhausts. The L-shaped perforation pattern on the rear metal panel further enhances ventilation beyond what the exhaust fan alone provides.

The 140mm front fans (hydraulic bearing) are rated at up to 1,900 RPM with 116.53 CFM airflow and 3.32mmH2O static pressure at max speed; the 120mm rear runs up to 1,800 RPM with 60.81 CFM and 2.53mmH2O. The front fans handle the heavy lifting for component cooling, while the rear provides consistent exhaust. In typical gaming loads with mid-to-high-end hardware, the case maintains competitive thermals for its compact MicroATX footprint — performance that aligns with the PPLP A+ rating.

The 360mm radiator support is top-mounted only, which is a critical detail for AIO cooling builds. Radiators up to 65mm thick are supported at the top position in 360mm or 240mm configurations. Builders pairing large VRM heatsink motherboards (such as the ASUS TUF GAMING B850M) with a top-mounted AIO should follow Lian Li’s specific radiator installation sequence — radiator from rear fan side first, angling front edge in bottom-to-top — to avoid clearance issues with taller VRM shrouds. Lian Li documents this explicitly in the product page, which is a welcome degree of build guidance transparency.

CPU cooler height is limited to 163.5mm, which accommodates most high-performance tower coolers. Builders planning air-cooled builds with tall coolers like the Noctua NH-D15 (165mm) should verify compatibility before purchasing. The PSU bay supports ATX units up to 200mm in length, covering the vast majority of modular and semi-modular units currently available.

Design and Build Quality

The Vector V150 INF uses a steel chassis with 4mm tempered glass front and side panels — thicker glass than the 3mm used in many competing cases at this price — creating a noticeably more premium flex-free feel when handling the panels. The infinity-mirror effect is achieved through the glass front panel combined with the ARGB fans’ mirrored centre hubs, producing a visual tunnel effect that deepens with distance and lighting intensity. In person the effect reads more dramatically than photographs convey, which is the right direction for a showpiece feature.

Dimensions of 470 × 221.5 × 443.9mm (D × W × H) and a net weight of 8.1kg place this firmly in compact MicroATX territory — meaningfully smaller than full mid-tower cases like the Fractal Design North or Corsair 4000D Airflow, while remaining large enough to accommodate full-size ATX power supplies up to 200mm and GPUs up to 400mm. The case is available exclusively in black at launch, which limits colour matching options for builders with specific aesthetic requirements.

The front infinity panel features precision-cut apertures that allow the 140mm fans to draw air directly through the glass, avoiding the airflow restriction common in solid-front designs. A detachable metal mesh filter sits behind the fans and prevents dust ingress; it removes without tools for easy cleaning. The modular side bracket in the interior is configurable for either additional 120mm fan mounts or supplementary 2.5″ SSD storage, giving builders a genuine choice between cooling capacity and storage density — a flexibility detail rarely seen at this price point.

Cable management is handled via dedicated routing channels, multiple tie points, and ample space behind the motherboard tray. A dedicated GPU power-cable passthrough on the PSU shroud routes power cables directly to the graphics card without crossing the main chamber, which cleanly separates the power delivery path from the visible interior. Velcro tie points are included; cable routing channels are wide enough to bundle thick 24-pin cables without forced bends.

Software and User Experience

The Vector V150 INF integrates with Lian Li’s L-Connect 3 software ecosystem, which handles fan speed curves, ARGB lighting profiles, and synchronisation across compatible Lian Li products. The built-in rear control board includes a wireless receiver, enabling wireless control when paired with an L-Wireless Controller (sold separately). For builders who prefer wired control, the board connects to standard motherboard ARGB headers and fan headers directly, making it compatible with ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, and other mainstream RGB ecosystems without requiring L-Connect 3 at all.

L-Connect 3 itself is a mature piece of software that receives regular updates alongside new Lian Li product launches. Fan curve control is granular — users can set temperature-based response curves per fan zone — and lighting profiles are extensive without being overwhelming. One limitation is that the rear integrated control board does not support external fans beyond the three pre-installed units; additional fans in the top, side, or bottom positions must be managed through the motherboard’s own headers or a separate fan controller.

Build experience is consistently reported as positive by independent reviewers, with the modular side bracket, PSU shroud passthrough, and clearly marked routing channels reducing first-build friction meaningfully. The case ships with a sizing kit of sample rings for radiator screw placement and a well-organised accessory bag. Panel removal requires thumb screws on the rear — not truly tool-free, but standard for the category and preferable to snap-fit panels that loosen over time.

Battery Life

Not applicable — this is a PC case with no battery component.

Value for Money and Competition

At $84.99 MSRP, the Vector V150 INF is positioned in the mid-range of the MicroATX case market, which runs from around $60 for budget options to $150+ for flagship cases. The direct competitors at comparable money include the Fractal Design Pop Air ($89.99), the NZXT H5 Flow (~$89.99), and the Cooler Master HAF 500 (~$99.99). None of these offer an infinity-mirror front panel, and the Lian Li’s three pre-installed ARGB fans represent genuine added value over cases that ship with one or no fans.

The Fractal Design Meshify 2 Compact (~$109.99) offers superior dust filtration, easier panel access, and a more mature build experience, but costs roughly $25 more and presents a utilitarian aesthetic that appeals to a different buyer. The Corsair 4000D Airflow (~$104.99) provides superior expansion — longer GPU clearance than needed and more drive bays — but is a full mid-tower with a larger footprint. For builders specifically constrained to compact MicroATX dimensions who want the visual impact of an infinity panel, no direct competitor matches the V150 INF’s combination of features and price.

The L-Wireless Controller being sold separately is a mild friction point — builders wanting wireless lighting control will spend an additional $20–30 — but the wired header integration works cleanly without it. Overall, the V150 INF represents strong value for its target audience of visually-focused compact builders who do not want to pay premium case prices for premium aesthetics.

Verdict

The Lian Li Vector V150 INF earns its recommendation for a well-defined buyer profile: someone building a compact MicroATX system who wants the visual impact of an infinity-mirror front panel without paying flagship case prices. At $84.99 with three pre-installed ARGB fans, a pre-installed GPU anti-sag bracket, back-connect motherboard support, and a PPLP A+ cooling rating, the value-to-specification ratio is genuinely impressive for the category.

The honest caveats are few but worth understanding before purchasing. The 360mm radiator support is top-only — builders expecting front-mounted AIO support will be disappointed. One HDD maximum is a real storage constraint for certain use cases. And fingerprints will require attention if the infinity-mirror panel is to remain a showcase feature rather than a smudge display. None of these are disqualifying for the target user, but they are important to verify against your specific build plan.

For MicroATX builders who want style, substance, and competitive airflow at a reasonable price, the Vector V150 INF is one of the clearest buys in the compact case market right now. Check current pricing for the Lian Li Vector V150 INF on Amazon or the official Lian Li product page.

Rating: 4.5 / 5 — Best infinity-mirror mATX case you can buy for under $90.

Specs verified from the official Lian Li Vector V150 INF product page (lian-li.com/product/vector-v150inf/). Independent cooling rating from PPLP Lab. Launch pricing and availability confirmed via TechPowerUp, KitGuru, and Overclocking.com coverage (April–May 2026). Prices accurate as of August 2026. Contains affiliate links.